Thread: lubing pellets
View Single Post
Old 12th July 2012, 07:54 PM
Vic's Avatar
Vic Vic is offline
Join Date: May 2012
Posts: 26

Originally Posted by AndyIoW View Post
The way I have seen done is
  1. Empty tin into a empty jam jar with a lid.
  2. Put a splash of washing up liquid in and then 2/3rds fill with warm water.
  3. Agitate the jar enough so as not to damage pellets
  4. Tip into a plastic sieve (not a food one) and then rinse with warm water.
  5. Put on a teatowel or something similar to absorb the excess water
  6. Use a hairdrier to dry them off keeping an eye out for damaged ones.
  7. Put warm pellets into a ziplock bag and then add few drops of the lube and swish around in the bag to coat the pellets.

Me all I do is just chuck some lube on them in a ziplock bag.
I agree but... I suggets first add only 2 drops of lub per tin in the ziplock bag, spread lub and then add pellets.

Last edited by Vic; 12th July 2012 at 07:58 PM.
Reply With Quote