Thread: Hw100 help!!!!
View Single Post
Old 12th July 2012, 06:52 PM
steve cole's Avatar
steve cole steve cole is offline
Senior Member
Join Date: Jun 2012
Member of: Greyhound Gun Club
Location: Nuneaton
Posts: 143
Exclamation Hw100 help!!!!

Hi guys sorry for the over dramatic title but to me this is a very major problem. This evening i removed my A&M Cylinder and when i did parts from the main inlet valve fell on the floor i have looked at the exploded diagram and all i can find is part number PW240 which is called main valve, complete. However my problem is the little valve has come unscrewed with the cylinder and some other parts have fallen out, I have taken pictures bellow of what i have found, can someone please shed some light on what order they go back in? And has anyone else had this isue? -In the gun withought the cylinder or valve??? - Parts i found on the floor???

From what i can work out the bearing goes in first followed by the spring then the valve screws on? Acting like a one way? But i need to be 100%

Any and all help is much apreciated hear


Last edited by steve cole; 12th July 2012 at 06:59 PM.
Reply With Quote
Connect With Facebook to "Like" This Thread