Thread: Decanting air
View Single Post
Old 30th May 2011, 03:50 PM
Jon Jon is offline
Senior Member
Join Date: Nov 2008
Location: Nr Wolvo
Posts: 769

Fine Dean, i decant in to a 3ltr or 10.4ltr 232bar from 12ltr 300 bar, scary nice and slow wait for it to filter through.

All MDE DIN fittings two hoses one has the conventional widely used quick fill female coupler the other an A or O type coupler, could never remember. For the decant i use the hose and nipple rated at over 300BAR without the valve, screwed in to the DIN on 300BAR bottle.
Fairly sure but check the widely used type in steel are not rated for use at 300BAR, brass even less and vary between manufacturers of these fittings.
Reply With Quote