Thread: Ftp900
View Single Post
Old 18th October 2016, 01:52 PM
C.Eaton's Avatar
C.Eaton C.Eaton is offline
Senior Member
Join Date: Aug 2011
Member of: ETL / TEGC
Location: Hockley, UK
Posts: 431

Just use a very fine saw like a hacksaw, do not use a conventional wood saw unless you fancy spending a long time sanding down laminate splinters.
A hacksaw slices through laminate without splintering and if you're careful you just need to sand the bottom down slightly, then revarnish to keep any moisture out of the laminate.
Reply With Quote