View Single Post
Old 7th September 2016, 07:44 PM
Alcanara's Avatar
Alcanara Alcanara is offline
Senior Member
Join Date: Oct 2012
Location: Harrogate & Murcia, Spain.
Posts: 151

Originally Posted by Tench View Post
The creep towards the end may be because the gun has actually come off the reg and is making more power from slightly less pressure behind the firing valve. Lower the reg pressure a little more until the power drops away as it comes off the reg. With the rifle making more power from the correct reg setting it will also require less hammer spring tension calming the hammer acceleration down too.
Cheers, I'll give that a try next time i do a service..... The nice thing (or so I believe) about the Huma is that it is so easy to change the bar setting..... currently I have to keep taking it on and off the bottle until I get the desired reading (currently 95bar)

Thanks again for the tips

.......~ ~
....-(@ @)-

EV2 MkIV Red. Sightron SIII 10-50x60 FT.
AJP Rail. Sportsmatch ATP66.
Reply With Quote