View Single Post
Old 13th January 2016, 12:03 PM
POI POI is offline
New Member
Join Date: May 2014
Location: Northampton, UK
Posts: 9

I use a metal VFG bore cleaning rod with rotating handle and to stop the metal on metal contact I tightly wrap PTFE plumbers tape around it's shaft - long enough for the barrel length. It doesn't last long before it comes off or slides up and has to be taken off but it's good for at least one polish. An added advantage of this approach is that you can push pellets through the barrel with the VFG rod to feel the tight spots and then mark with a marker pen on the white PTFE tape. Puts the VFG cleaning pads with your polishing compound in the right place.
Reply With Quote