View Single Post
Old 3rd January 2016, 09:33 AM
Ninefingers's Avatar
Ninefingers Ninefingers is offline
Join Date: Jul 2014
Location: Wingate,co durham
Posts: 65

One of my 2002,s had the same problem...
A bit of greasy oily crap would travel from reg to the chamber were the hammer travelled(don't know the correct terminology) how to fettle if memory serves.....
Remove air cylinder.
Remove trigger mechanism.
Remove scope rail if one fitted.
Remove the 2 bolts which hold front and rear of action together,then separate.
The chamber is in front part behind reg....clean thoroughly with cotton wool buds and give hammer a clean......put back together....please do this on a clean surface.....
Reverse process to rebuild....
You will have to put some lead through her before the reg fps picks up.....
Hope that helps buddy..."...
Reply With Quote