View Single Post
Old 29th December 2015, 07:10 PM
Ewan's Avatar
Ewan Ewan is offline
Join Date: Sep 2015
Member of: Iden Ferns
Location: Hastings
Posts: 89
Default Scratch removal & AR5s advice please

Evening all,

I have a few small minor wear & tear scratched on my AR5s metal work, what's the best way to remove them & get a good shine finish ?

Also on the power adjuster which way lowers the power ?
After putting it through the combro it was coming out at 829 so it needs a slight tweak.

Best grease to use on the loading bolt & do you also grease the pellet loading grove as seems to almost have metal on metal contact when cocking or does the grease from the loading bolt 'work' it's way through to there on it's own ?

Trigger adjustment advice would be cool, I have emailed Steve for a pdf doc regarding this that was floating around the net but he's probably not back at work yet.

Any tips / tricks with maintenance & general use with the AR5 would be really appreciated from any members as it's very new to me.

Reply With Quote
Connect With Facebook to "Like" This Thread