View Single Post
Old 15th October 2015, 11:09 PM
vinny's Avatar
vinny vinny is offline
WHFTA 2015 World Champion
Join Date: Mar 2014
Member of: M.A.D
Location: essex
Posts: 578
Default lets kick this off

Originally Posted by KeithW View Post
AA owns their own dies, which JSB use to produce pellets for them. The design is different from JSB's
And just as an aside I have noticed that (in most of the batches I've used) JSB can have quite a bit of swarf and AA has none
Probably done this to death but
wash bake and lube
aftr I have soaked in white spirit overnight , rinsed carefully in bio washing up liquid and then put in the oven at about 100 C ! once gently rolled over a white porcelain plate shows more signs of swarf than at amy other point of inspection ,

so..... tried heating up straight from the tin to start with , gently rolled around in a plastic colander after cooling a bit , produced more swarf straight off ,
so imho, heat roll, rinse in spirit , then washing up liquid , DONT introduce any kind of dust or particle from either your favourite paper towel or teacloth FOR OBVIOUS REASONS then lube if you like ( I do, my ft heros recommended fp10 and I like , thanks lads, halves my groups )

FTP900 MTC connect,Welhamanium internals -sorted
HFT500, ACZ stock MTC connect
TX200 Mk3 CS1000 stock, hawke vantage sf , Nick G internals
Steyr ?, maybe , they cant all be wrong?

Last edited by vinny; 15th October 2015 at 11:14 PM.
Reply With Quote