View Single Post
Old 3rd May 2015, 02:53 PM
john0neuk's Avatar
john0neuk john0neuk is offline
Senior Member
Join Date: May 2014
Member of: Dartmoor Marksmen
Location: Ivybridge
Posts: 1,107


There are two or 3 basic types. Cantilever type as per the RAW and MEC ones

Pin and sliding collar as per the Anschutz

Pm me your email and will send pics - I have both types

Or I think it is the standard Steyr FT 2012 type which is an approx. 75mm by 100mm or so flat plat about 15mm thin that has two elongated slots in it 50 mm apart and about 80mm by 8mm - which the foot shaped hammy slides up and down on it. clamped by two bolts - that gives a degree of tilt as well.

Saw one at the GP last week looked really good. Obviously has a rail slider fitment on the top which clamps with a bolt through it. - Sorry don't have one to picture - so description is a bit long winded. If you PM me yr email I will draw and scan so you can see it- but it is from memory!
Kind Regards


FTP900 +Sightron S111 10-50 x 55
AA Pro Target in FWB FP70 stock + MTC Mamba lite
Daystate Airwolf + Bushnell Elite 6500

" life is about the memories we hold and not the things that we own"

Reply With Quote