[QUOTE=Brian.Samson;194114]Dead easy to snap the hook on that joint (the metal is only 1.7mm thick!!)
In Blue Peter stylee... here's one I broke earlier
just leave it folded back in its recess, thats ok for hft , a lot of people turn the assembly upside down so the paddle is on the bottom ,the rule is as far as I, m aware that the paddle cannot exceed 2.25 inches from the tip to the bend where it comes away from the vertical , , your bigger issue will be the pistol grip depth , that will need trimmming down, touch that on the deck and pull the trigger, hey presto, donut !]
FTP900 MTC connect,Welhamanium internals -sorted
HFT500, ACZ stock MTC connect
TX200 Mk3 CS1000 stock, hawke vantage sf , Nick G internals
Steyr ?, maybe , they cant all be wrong?
Last edited by vinny; 11th April 2015 at 10:03 PM.