View Single Post
Old 30th January 2015, 08:15 AM
nemesis's Avatar
nemesis nemesis is offline
55yrd standing expert, or was it 8 or 9?
Join Date: May 2010
Location: Yorkshire
Posts: 829

Originally Posted by rogb View Post
Great idea!
Could you also turn down a little brass collar, after measuring for say 798 fps, and thread lock it in place if you haven't got a welder?
Haven't had a Steyr for a while and can't remember if it will be possible?
It could work but the area where the velocity adjuster widens is very slight. It might be difficult.
I don't know if removing the remaining threads will actually work either come to think of it as it will make it narrower at this area. It will still probably screw into the block.
Maybe try running solder onto the threads and file it smooth, or try some two pack epoxy metal filler.
Let your shooting do the talking.
It's not the aim and release that decided the shot, it's the preparations.

Last edited by nemesis; 30th January 2015 at 09:08 AM.
Reply With Quote