View Single Post
Old 7th January 2015, 05:25 PM
Jezza's Avatar
Jezza Jezza is offline
Senior Member
Join Date: Oct 2014
Member of: Millride FTC
Location: Wolverhampton
Posts: 134

Originally Posted by Barry View Post
I've just done mine, although I didn't know AA offered it as an option.
Dead easy:

Remove action from stock.
Remove air stripper and forward part of shroud.
Remove A frame/Figure 8 barrel support. It's two pins and one C/S bolt into an aluminium rail that runs under the action, just tap the pins out with a drift.
Remove rearward part of shroud along with 'O' rings.

Refit air stripper and refit into stock. Re zero and Presto! Floated You'll lose the spirit level bar

Some folk remove the aluminium rail that links the action block to the barrel support figure 8. I haven't yet.
Barry, how do you remove the stripper/muzzle break mate?
Just wondering for future reference if i ever have to remove it.

As yet i have no issues at all with my FTP, very accurate and holds zero well, just hope this continues when the weather warms up and the gun contracts and expands more in the heat.

Reply With Quote