View Single Post
Old 7th January 2015, 10:33 AM
Barry Barry is offline
Senior Member
Join Date: Oct 2013
Member of: Iceni Marksmen
Location: Harwich
Posts: 283

I've just done mine, although I didn't know AA offered it as an option.
Dead easy:

Remove action from stock.
Remove air stripper and forward part of shroud.
Remove A frame/Figure 8 barrel support. It's two pins and one C/S bolt into an aluminium rail that runs under the action, just tap the pins out with a drift.
Remove rearward part of shroud along with 'O' rings.

Refit air stripper and refit into stock. Re zero and Presto! Floated You'll lose the spirit level bar

Some folk remove the aluminium rail that links the action block to the barrel support figure 8. I haven't yet.
Reply With Quote