View Single Post
Old 10th November 2014, 08:28 PM
JonathanN JonathanN is offline
New Member
Join Date: Mar 2013
Location: Belper, Derbyshire
Posts: 13

Hi, as far as I can remember no Shamal was fitted with a factory reg, the first AirArms regs were fitted to the 100 series and worked on an "air spring/gas ram" which was blamed for power variations with temperature shifts, the Olympic trigger also came out with the 100 series (at an extra cost) and is a true 2 stage trigger like the ones fitted to the RN10 onwards. if it has either of the above fitted its probably retro fitted.
the stock options from AirArms was either a sporter style or target style (same stock that was fitted to the TM100).
the 100 series reg can be retro fitted in a Shamal but you need to reduce the outside diameter of the reg body and change the seal configuration where the reg body screws together.
Reply With Quote