Hi all, well my ProTarget is finally here and glorious it is too. It's got a full length cylinder and shroud on it but i'm replacing the cylinder with a carbine one (when I work out how to undo it, it's TIGHT) and also replacing the shroud with a carbon one and an alloy stripper. I've sorced a company who will make a tube to any measurement. My barrel is 15mm diameter but should I get the carbon 15mm internal diameter or give it half a mil so it slides on but not too sloppy. I'm fitting a collar to the breach end so it will fit in the shroud recess and leaving the carbon short at the muzzle end to allow a stripper to fit that will be a smooth transition from the carbon (thats where P Dutton is coming into the project)
The measurement I had in mind is a 15.5mm I/D with an 18.5mm O/D, it comes in a 4x4 Twill high gloss finish but in a 1250mm length.
Does anyone want to buy the remaining carbon tube from me, around 700mm. if you are interested then drop me a PM.
AA EV2 Mk2/Hawke Panorama half mildotEmleyMoor FTC