View Single Post
Old 2nd June 2014, 04:16 PM
Rift's Avatar
Rift Rift is offline
Join Date: Sep 2009
Member of: M.A.D
Location: Essex
Posts: 422

Originally Posted by Paul444 View Post
I want to extend downwards my Hamster or Fore-end what is the maximum depth that is permitted in HFT and where do you take the measurements from.

Most rifle & stock designs can be used for UKAHFT competition as long as they are within the following rules:

Forend depth is limited to a maximum of 150mm, this is measured from the centre of the barrel to the lowest part of the rifle forward of the pistol grip.
FT style butt hooks are not allowed, although the paddle style of butt pad is allowed.
The paddles of the buttpad must not exceed 2.25" in length
When standing or kneeling, no part of the rifle may be in contact with the ground.
When taking a prone shot the only part of the rifle which may be touching the ground is the bottom edge of the butt pad, no other device or buttpad extension may rest on the ground

Taken from
MAD for it.

Steyr LG 110 Gary Cane, Leupold 2.5-8x36 TMR
Member of the UYK, UYB, UYC, UYH & UYE club.

I would like to agree with you....but then we would both be wrong !!
Reply With Quote