View Single Post
Old 7th January 2014, 07:12 PM
DeanB DeanB is offline
Senior Member
Join Date: May 2009
Member of: Harriers FTC
Location: Worcs
Posts: 499

Originally Posted by kilty View Post
Hi Mike
For 8 and 9 yards you could use a CF adapter or you could establish aim points on measured targets and then either estimate like you do in HFT or remember the degree of blurriness

FT targets can come down to 8 yards and if it's a 15mm then your range estimation could be critical.

A CF lens is about 40 then you will need a BC to fit it into, like hens teeth apparently.Using the CF is exactly the same as for any other target.

My suggestion is learn your 8 and 9 yard settings unless you have a CF and a BC at hand.

Nice seeing you at Springfield last week
cheers Barry
And when you use a CF remember to use the correct markings on the scope. I nicely missed an 8yd target at 1/2 inch below 6 o'clock on Sunday - decided to dial according to non-CF markings - DOH!
Reply With Quote