Thread: Steyr lg100
View Single Post
Old 12th November 2013, 09:40 PM
nemesis's Avatar
nemesis nemesis is offline
55yrd standing expert, or was it 8 or 9?
Join Date: May 2010
Location: Yorkshire
Posts: 829

Regarding the clear washer under the transfer port,you can make your own using a sheet of plastic.
The thickness is 00.10mm with a 8.5mm mm centre. To make the hole you can use a drill bit warmed up to burn the hole.if you can't find any plastic use something like laminating sheet but put it through the laminater first to stiffen it.You might not need the washer though,check first to see if it's leaking air.
Reply With Quote