View Single Post
Old 4th September 2013, 08:46 PM
Splund Splund is offline
New Member
Join Date: Dec 2010
Location: West Sussex
Posts: 12
Default EV2 trigger pictures/help

I have just bought an EV2 but the trigger feels a little wierd.
All looks OK but if anyone has a decent picture of what the EV2
trigger mech looks like that would be great.
Just a shot of the trigger block with the side plate removed.
The main problem I have is the black cocking arm, top left, dosent
seem to have a return spring. When the gun is cocked and the lever
is pushed forward so the probe enters the barrel, the black cocking remains
in the rear position, resting against the hammer.
This causes inconsistent low powered shots. Is there supposed to be
a return spring?
I realise the brass spacer washer is not fitted on the arm
Reply With Quote
Connect With Facebook to "Like" This Thread