View Single Post
Old 24th July 2013, 01:13 PM
5teve L 5teve L is offline
Join Date: Apr 2009
Member of: The Oaks & Horsham hawks
Location: Horsham, West Sussex.
Posts: 1,183

Very easy to work on if the anti tamper is removed, the A/T is fairly easy to remove as well if you are careful.

All you really need to do is strip it, clean & polish the hammer rail & firing pin so they run smoothly, you can fine tune the firing pot as well if you have time & patience, if not 57mm is about right with the older style brass pot.. The triggers are better if you add the little crinkle washers instead of the o-rings & polish the sears a little.
In life you should not persue goals that are easily achieved, develop an instinct for what can be only just achieved through your greatest efforts.
Reply With Quote